Product features:
1. The inner rotary body welding assembly with machining center, a one-time molding, ensures that the rotating body in the rotating axis of a rotating body and the concentricity.
2 mechanical seals are used to solve the problem of water vapor leakage in the rotating process.
The 3 supporting wheel is made of tin bronze, stainless steel, synthetic steel and other materials, which prolongs the service life and solves the defects of the rotation of the bearing.
4. The guide rail adopts roller, located on the left and right and the bottom, reduce the workers and the labor intensity of material in the process, put an end to the rotation in the process of product material basket back and forth in shifting of the phenomenon.
5 material basket pressing system all adopt cylinder automatic pressing cylinder set, all stainless steel alloy production, solves the in use process for rust caused by cylinder leakage phenomenon.
6 the transmission system adopts gear reducer with brake function with automatic positioning system, ensure the rotating body in the stop after always the same location, convenient feeding smoothly.
The 7 rotating speed frequency control, the user can according to the viscosity of the products of different rotation speed adjusting rotary body at any time, so as to achieve the product stratification, not to precipitate.
8. Equipment and gear reducer seat as one of production, solve the in use because of deceleration machine base and the pot body deformation caused by the transmission shaft concentric degree change and the emergence of a series of problems in the process of.
9. The sterilization process adopts the PLC automatic linear control, tank heat distribution of temperature control in the + / - 0.1 ºC, heating, energy saving.
itable forflexible packaging, plastic packaging, bottles and a variety of canned food
Characteristic
1. Sterilization in short time
Utilize double-tank hot water circulation for sterilization. Heated the water in the hot water tank to the required temperature of sterilization in advance, the sterilization time can be reduced and work efficiency can be improved.
2. Energy effective
The working medium during sterilization is recyclable. It reduces the production cost by saving energy, time, labor and material resources.
3. Even exchange of the water flow, even temperature, no dead area
It utilizes the international advanced technology, hot water circulation and immersion for sterilization. In the process of sterilization, circulation water in the sterilization trough will be uninterruptedly shifted up and down, left and right. It ensures the heat distribution of any spot in the trough is even. It effectively puts an end to the phenomenon of dead area in the process of sterilization and makes the guarantee period of the product more stable and longer. The temperature in the sterilization tank stays stable in all stages of the sterilization, which ensures the qualification rate of F value.
4. Automatic system
The whole sterilization process is controlled by PLC. It is a one-time action without manual operation. It utilizes the chart plate and screen touch control. All time intervals are controlled by the simulate sensor and automatic valve. The digital exhibition of pressure and temperature makes it applicable to input any pre-programmed pressure and temperature models into the computer. The computer can hold 100 sterilizing formulae.
5. Simulate temperature control system where the setting of multi-stage heating system is available.
The sterilizing method by multi-stage heating can minimize the heat on food, which can keep its original flavor, taste, nutrition and color to the utmost and make every kind of food sterilized in its best condition. The accuracy of the sterilizing temperature is up to ±0.3 so as to avoid over boiling or incomplete sterilization.
6. Function of measuring F-value
Every retort produced by Uwants can be equipped with F-value measuring instrument. The F-value software can make the F-value calculation every 3 seconds. All sterilizing data including sterilizing conditions, F-value, time-temperature curve, time-pressure curve and so forth can be saved or printed after the processing of data processing software to serve the production management.
Technical parameter
Type Item | UwantsBL09-18 | UwantsBL10-22 | UwantsBL10-30 | UwantsBL12-24 | UwantsBL12-27 | UwantsBL12-30 | UwantsBL12-33 | UwantsBL12-36 | UwantsBL13-35 | UwantsBL13-40 |
Inner of diameter(mm) | 900 | 1000 | 1000 | 1200 | 1200 | 1200 | 1200 | 1200 | 1300 | 1300 |
Length of canister(mm) | 1800 | 2200 | 3000 | 2400 | 2700 | 3000 | 3300 | 3600 | 3500 | 4000 |
Total length(mm) | 3500 | 3900 | 4700 | 4200 | 4500 | 4800 | 5100 | 5400 | 5400 | 5900 |
Total width(mm) | 3500 | 3800 | 3800 | 4200 | 4200 | 4200 | 4200 | 4200 | 4400 | 4400 |
Total highness(mm) | 1800 | 2000 | 2000 | 2200 | 2200 | 2200 | 2200 | 2200 | 2300 | 2300 |
Net capacity (m³) | 1.4*2 | 2.1*2 | 2.7*2 | 3.2*2 | 3.6*2 | 4*2 | 4.3*2 | 4.6*2 | 5.14*2 | 5.9*2 |
Steam Volume consumption(kg/batch) | 160 | 240 | 300 | 360.00 | 400.00 | 460.00 | 480 | 500.0 | 600 | 660 |
Power consumption(kw/h) | 14 | 14 | 21 | 21 | 21 | 21 | 21 | 21 | 21 | 21 |
Handing capacity(t) | 0.35*2 | 0.55*2 | 0.75*2 | 0.9*2 | 1.0*2 | 1.2*2 | 1.35*2 | 1.5*2 | 1.7*2 | 1.9*2 |
Range of application
The PLC controlling automatic sterilizer is suitable for a wide variety of packaging materials,such as:
1.metal containers
2.plastic & rubber containers
3.flexible package